TA Triumph-Adler DCC 2520 - Manual (Page 187)

Various Settings and Registration
7-5
Turning the Bulletin Board ON/OFF (Bulletin Board setting)
If you use the Bulletin Board function, you only need to enter documents into memory once and they
will be available for transmission to any number of receiving parties upon receipt of their polling
request. (Refer to Preparing Documents for a Polling Transmission on page 5-10.) In order to use
the Bulletin Board function, it is necessary to turn it ON here in advance.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Press the System Menu/Counter key. The Default
Setting screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] cursor key until Bulletin Board is highlighted.
4 Press the [Change #] key.
5 Select whether you want to turn the
Bulletin Board function ON or OFF.
Press the [Save doc. after Tx] key to turn
it ON and the [Del. doc. after Tx] key to
turn it OFF.
NOTE: If you select Del. doc. after Tx, the documents to be deleted from memory after they are
transmitted once. If you select Save doc. after Tx, the documents will remain in memory waiting for
the next polling request even after they are transmitted.
6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
Print
System Menu / Counter
Bulletin Board
Del. doc.
after TX
Save doc.
after TX
Back
Default setting screen