TA Triumph-Adler DCC 2520 - Manual (Page 97)

Troubleshooting
4-5
Call for Service Maintenance by qualified service personnel is required.
Contact your service representative, an authorized
service center or the place of purchase. If [C] and a
4-digit number are displayed as well, inform the service
personnel of the displayed number. ______
Time for maintenance
Time for scheduled
maintenance
Maintenance by qualified service personnel is required.
Contact your service representative, an authorized
service center or the place of purchase. ______
Communication Error An error has occurred during a fax transmission or fax
reception. Check the error code – that indicates the
origin of the error – on the corresponding Transmission
Report (or Reception Report) that is printed out in order
to confirm the cause of the error. 10-11
No DC Loop
No Dial Tone The modular cord may not be connected properly to
either the telephone or the line jack (L) on the fax. Either
that, or there is a problem with the telephone line. In this
case, contact your telephone company. ______
No Response Dialing was accomplished, but connection to the other
party was not possible. Check with the other party. ______
No encryption code is
registered. The destination was dialed using a one-touch key that
was designated for Encrypted Transmission, but the
Encrypted Transmission was not possible because the
corresponding Encryption Key is no longer registered in
your fax. 5-59
5-66
Message Procedure Page