TA Triumph-Adler DCC 2520 - Manual (Page 207)

9-1
9 Network FAX Settings
This section contains explanations on the settings required for using the Network FAX function.
• Performing the Setup Procedure...9-2
• Connecting the Fax Machine and the Computer...9-3
• Making the Initial Settings on the Fax Machine...9-4
• Registering the Network FAX Information...9-8
• Printing Out a Network FAX Settings List...9-13
As the contents of the settings will differ according to the environment of the computer connected to
this machine, make sure to read the explanations corresponding to your computer environment and
to perform the appropriate procedure.
Be sure to read the On-Line Manual on the included CD-ROM as well. It contains explanations on
Network FAX transmission and reception procedures, the various corresponding settings, and on
operation at the computer.
About the On-Line Manual
A PDF format On-Line Manual is included on the provided CD-ROM.
This On-Line Manual contains explanations on the applications required in order to use the Network
FAX functions. Its contents are as follows:
• How to install the various applications
• How to perform Network FAX Transmission
• How to perform Network FAX Reception
• How to use the Address Book
• How to use the Address Editor
Opening the On-Line Manual
Perform the following procedure in order to open the On-Line Manual.
1 Insert the provided Network FAX Library CD-ROM onto the CD drive of your computer. The
Main Menu screen will automatically be displayed for set-up.
2 In the Main Menu screen, click on [Documents] to open the On-Line Manual.
NOTE: In order to open the On-Line Manual, Adobe Acrobat Reader version 5.01 or later must be
installed in your computer. If it is not installed in your computer, install it from the provided CD-ROM.