TA Triumph-Adler DCC 2520 - Manual (Page 71)

Fax Operation (Various Functions)
3-5
Preparing the Next Documents During Another Communication (Standby
Transmission)
Standby Transmission refers to the process of
preparing documents for transmission while the fax is
occupied with another communication.
If, during that communication, the documents you want
to transmit are set and the destination fax number is
entered, those documents will be automatically
transmitted once the current communication has been
completed.
Since, with this fax, it is possible to schedule a Standby
Transmission and then have your documents given
priority whenever the fax is currently sending to multiple communications or there are other
communications already scheduled in memory ahead of yours, Standby Transmission is thus
convenient for sending urgent documents quickly during communications which normally take an
extended amount of time, such as Broadcast Transmission and Polling Reception.
NOTE: A maximum of 50 communications (including any combination of Standby Transmissions,
communications that use the timer and Interrupt Transmissions) can be scheduled at one time.
You can also designate each of the various types of fax communication available in this fax such as
Broadcast Transmission as a Standby Transmission.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Set the documents you want to transmit in the
Document Processor or on the platen.
2 Enter the destination fax number.
NOTE: You can enter the fax number(s) using the numeric keys, abbreviated numbers, one-touch
keys, group dial keys, program keys or the address book. Chain dial keys can be used as well.
Press start key to transmit
Dest
Ready for fax transmission.
Basic Application
Duplex Address
Register
TX book
Print Report
Memory
OCT-11
1234_ .
Abbrev.
One touch
destinat.
Delayed TX
Orig. size
setting
Orig image
quality
Exposure
mode
8½×11" Normal Regular
Delete Space Pause Subadd. Next des