Modifying or deleting f-code relay boxes, Modifying or deleting f-code relay boxes -28 – TA Triumph-Adler DCC 2520 User Manual

Page 130

Advertising
background image

Other Features of this Fax

5-28

2

If you entered the fax number with the numeric keys, press the [Next destinat.] ([Next dest.])
key.

9

Press the [Finish dest. Set] ([Dest. set]) key.

10

Select whether or not you want the
received documents to be printed out at
your fax (press the [On] key to have
them printed and the [Off] key to stop
print out), and whether or not you want
send a Transmission Report regarding
the results of the final transmissions to
the initial transmitting station (press the
[On] key to send a report and the [Off]
key to not send a report.).

11

Press the [Next] key.

If you selected to send a Transmission Report to the initial transmitting station, go to the next step. If
you selected NOT to send a report, proceed directly to step 14.

12

Enter the fax number of the initial transmitting station.

NOTE: You can use the numeric keys, one-touch keys and Chain dial keys to enter the fax number.

13

Press the [Finish dest. Set] ([Dest. set]) key.

14

Check the registered information.

Each item can be modified.

15

Press the [OK] key. The message display will return to the same screen as was displayed in step 4.
If you want to continue registering other F-Code Relay Boxes, repeat steps 4 through 15. Once you
are finished registering F-Code Relay Boxes, press the Reset key.

Modifying or Deleting F-Code Relay Boxes

Perform the following procedure when you want to add or delete final destinations or change other
information registered under any F-Code Relay Box, as well as when you want to completely delete
one of those boxes.

NOTE: In order to modify the contents of or completely delete an F-Code Relay Box, it is necessary
to enter the corresponding F-Code password during the procedure.

If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.

1

Perform steps 1 through 3 of Registering New F-Code Relay Boxes on page 5-26.

2

Press the key which displays the
subaddress for the F-Code Relay Box
you want to modify or delete.

Date/Time

Off

Print Here

Back

Register box

On

02

.

Subaddress relay box

Off

On

Return report

Subaddress relay box

Register box

8888

.

0715

.

3333

.

Advertising
This manual is related to the following products: