Various settings and registration 7-18 – TA Triumph-Adler DCC 2520 User Manual
Page 200
Various Settings and Registration
7-18
Turning Duplex Reception ON/OFF (Duplex RX setting)
The Duplex Unit turns paper over inside the fax machine so that printing can be accomplished on
the back side of the paper as well (Duplex Reception function).
When the width of each page received is exactly the same, the documents will be printed onto the
front and back sides of that size of paper.
NOTE: To use the Duplex Reception function, it is necessary to turn it ON in advance.
When the Duplex Reception function is turned ON, all pages of a fax reception will be temporarily
stored in memory – regardless of the reception mode setting – and they will then be printed out at
one time.
2 in 1 Reception will not be available when both 2 in 1 Reception and Duplex Reception are turned
ON.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Press the System Menu/Counter key.
2
Press the [Fax Default] key.
3
Use the [T] cursor key until Duplex RX (2-sided RX) is highlighted.
4
Press the [Change #] key.
5
Select whether you want to turn Duplex
Reception ON or OFF by pressing either
the [ON] or [OFF] key, as appropriate.
6
Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
System Menu / Counter
Duplex RX
On
Off
Back
Default setting screen