TA Triumph-Adler DCC 2520 - Manual (Page 126)

Other Features of this Fax
5-24
1 Press the [Application] key. The
Application screen will appear.
2 Press the [RX Polling] key.
3 Use the numeric keys to enter the fax
number of the transmitting party.
NOTE: You can also enter the fax number using one-touch keys that have been designated for
F-Code Based Communication as well. If you do use such a one-touch key, press the Start key and
the reception operation will begin automatically.
4 Press the [Subadd.] key.
5 Press the [On] key.
6 Use the numeric keys to enter the
appropriate subaddress.
NOTE: This subaddress is required during an F-Code Based Communication in order to designate
the box in the destination party's fax. It can be up to 20 digits in length and can include any
combination of the numerals 0 - 9 and the symbols * and #.
You can use the [] and/or [] keys to move the cursor to a desired location, and you can clear the
entered number by pressing the [Delete] key.
7 Press the [Password] key.
8 If necessary, use the numeric keys to enter the predetermined F-Code password.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TX Address
Register
setting book
Print Report
Memory
OCT-11
RX Polling
TX Polling
Basic Application Register
box input
Sub.conf.
TX status
Reserved
on LCD
TX result
on LCD
RX result
data box
Print encr
box output
Sub.conf.
Memory
OCT-11
Print Report
Option screen
Select item.
FREE
Enter Destination.
RX Polling.
book
Address Abbrev.
Delete Space Pause Subadd.
ABC
Dest . 0
destinat.
Next
Memory
OCT-11
Subaddress TX
Off
_ .
Enter using # key.
On
Back
Subaddress
Password (MAX. 20 dig
(MAX. 20 dig
RX Polling.
Delete
Memory
OCT-11