TA Triumph-Adler DCC 2520 - Manual (Page 58)

Fax Operation (Basic Use)
2-22
4 If you want to delete the registered
one-touch key, press the [Delete] key
and then go to the next step. If you want
to modify the registered information,
press the [Change contents] key and
then go directly to step 6.
> Deleting a one-touch key
5 Press the [Yes] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue deleting other one-touch keys, repeat steps 3 through 5. If you are finished
deleting one-touch keys, press the Reset key.
> Modifying registered information
6 If you want to modify the abbreviated number (the displayed number of the speed-dial key under
which the one-touch key is registered), press the [Abbr. #] key. If you want to modify any other basic
information, press the key that corresponds to that information. (To modify information, refer to the
corresponding step under Registering New One-Touch Keys on page 2-18.)
NOTE: If you want to change more detailed settings, press the [Setting] key and select the desired
item.
7 Enter the abbreviated number of an
unregistered speed-dial key (0001 -
1000).
NOTE: Once a 4-digit number is
entered, that number may be changed
using the [+] and [-] keys.
8 Press the [Close] key.
9 Once you are finished modifying all of the items that you want, press the [OK] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue modifying other one-touch keys, repeat steps 3 through 9. If you are finished
deleting one-touch keys, press the Reset key.
Dialing With a One-Touch Key
You can dial a fax number by simply pressing the one-touch key under which that number is
registered.
NOTE: To select the conditions related to transmitting documents, such as the resolution and
contrast, refer to pages 2-5 and 2-6.
Prior to operation, check the message display to make sure that the touch panel is in the initial
mode for fax operation. (Refer to What is the Initial Mode? on page 1-11.)
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
Contents change/del.
Change
contents
Back
Register the dial.
One-Touch Key
Delete
03 .
0001 .
Name ABC
( 4 digits)
Enter using # key.
Abbreviation Back
Register the dial.
One-Touch Key
0001 .
0001 .