TA Triumph-Adler DCC 2520 - Manual (Page 154)

Other Features of this Fax
5-52
Modifying or Deleting Permit Fax Numbers
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Perform steps 1 through 3 of Registering New Permit Fax Numbers on page 5-50.
2 Press the key which displays the Permit
Fax Number you want to modify or
delete.
3 If you want to delete the registered
Permit Fax Number, press the [Delete]
key and then go to the next step. If you
want to modify the registered
information, press the [Change contents]
key and then go directly to step 5.
> Deleting a Permit Fax Number
4 Press the [Yes] key.
The message display will return to the same screen as was displayed in step 2. If you are finished
deleting Permit Fax Numbers, press the Reset key.
> Modifying information
5 Press the Stop/Clear key to delete the
old number and then enter the new
Permit Fax Number, or use the []
and/or [] keys to move the cursor to a
desired location and reenter the number
as desired. Pressing the [Delete] key will
delete the number directly above the
cursor.
6 Press the [OK] key. The message display will return to the same screen as was displayed in step 2.
Once you are finished modifying and/or deleting Permit Fax Numbers, press the Reset key.
Registering New Permit IDs
NOTE: You can register up to 5 numbers as Permit IDs in this fax.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
Permit FAX No.
Register in TX/RX Restriction list.
12345678 . #01
#02
#03
#04
#05 5555.
0612345 .
Contents change/del.
Change
contents
Back
Register in TX/RX Restriction list.
Permit FAX No.
Delete
1 .
12345678 .
Enter using # key.
Detail contents Back
Register in TX/RX Restriction list.
Permit FAX No.
(MAX. 20 digits)
1 .
Delete
12345678_ .