TA Triumph-Adler DCC 2520 - Manual (Page 69)

Fax Operation (Various Functions)
3-3
4 Press the [Duplex TX] key.
5 Press the [On] key to enable Duplex Transmission.
6 Select whether or not you want to
include a 1-sided cover page with the
transmission by pressing either the [Yes]
key or the [No] key, as appropriate.
• If you want to send a 1-sided document as a cover sheet to the rest of the 2-sided documents,
select [Yes]. In this case, the fax will transmit the documents WITHOUT scanning the back side
of the first page.
• If you want to transmit the 2-sided documents WITHOUT a cover page, select [No].
7 Select whether or not you want the image on the back side of the documents to be inverted during
transmission to match the orientation of the front side by pressing either the [On] key (invert rear
images) or the [Off] key (do NOT invert images), as appropriate.
• If you transmit documents as shown in
the illustration at right, select [On]. The
fax will then invert the image of the rear
side of each document in memory 180°.
• If you transmit documents as shown in
the illustration at right, select [Off].
8 Press the [Close] key.
Press start key to transmit
Dest
Ready for fax transmission.
Basic Application
Duplex Address
Register
TX book
Print Report
Memory
OCT-11
1234_ .
Abbrev.
One touch
destinat.
Delayed TX
Orig. size
setting
Orig image
quality
Exposure
mode
8½×11" Normal Regular
Delete Space Pause Subadd. Next des
Duplex TX
Off
On
Back
Cover page Top binding
Yes
No
On
Off
Memory
OCT-11
Ready for fax transmission.
Scanning Printout at the
destination fax
Direction of
document feed
J
Scanning Printout at the
destination fax
Direction of
document feed
J