TA Triumph-Adler DCC 2520 - Manual (Page 188)

Various Settings and Registration
7-6
Setting the Number of Rings [Auto Fax Reception] (Number of Rings setting)
The number of times the fax will [ring] before an incoming call is answered in the Auto Fax
Reception mode, the Auto FAX/TEL Switching mode [this setting is not available in metric models]
or the TAD Reception mode can be set here to any number between 1 and 15.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Press the System Menu/Counter key. The Default
Setting screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] key until # of Rings is highlighted.
4 Press the [Change #] key.
5 Use the [+] or [-] key to select the
number of rings before an incoming call
is answered in each mode: the Auto Fax
Reception mode, the Auto FAX/TEL
Switching mode (this setting is not
available in metric models) and the TAD
Reception mode.
6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
Print
System Menu / Counter
# of Rings Back
02 .
For fax RX
(01-15)
Auto Fax/Tel SW
(00-15)
For answering tel.
(01-15)
00 . 15 .
Default setting screen