TA Triumph-Adler DCC 2520 - Manual (Page 73)

Fax Operation (Various Functions)
3-7
Sending the Same Documents to Multiple Destinations (Broadcast
Transmission)
Broadcast Transmission allows the same
documents to be transmitted to a number of
destinations one after another, in a single
operation. If, for example, you want to transmit
the same documents from a central office to
multiple branch offices, this function is quite
convenient as it only requires you to perform
the transmission operation one time. The
documents you want to transmit are first
entered in memory, and dialing and transmitting
operations are repeated automatically for each
destination.
NOTE: If you enter all of the destination numbers using abbreviated numbers, one-touch keys or
group dial keys, this fax can automatically transmit the same documents to up to 300 different
destinations in a single operation. Program keys cannot be used in combination with any other
dialing method.
You can also perform Broadcast Transmission as F-Code Based Transmission or in conjunction
with the timer.
During a Broadcast Transmission to multiple destinations, documents will be transmitted using the
Memory Transmission mode even if the fax is currently in the Direct Feed Transmission mode.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Set the documents you want to transmit in the
Document Processor or on the platen.
NOTE: When the documents are set on the platen, it
is necessary, after each page is scanned, to select
whether or not you want to transmit more pages and
to select the size of each page. (Refer to page 2-8.)
2 Enter a destination fax number.
NOTE: You can enter the fax number(s) using the numeric keys, abbreviated numbers, one-touch
keys, group dial keys or the address book. Chain dial keys can be used as well.