Dialing with a chain dial key, Dialing with a chain dial key -16, Fax operation (various functions) 3-16 – TA Triumph-Adler DCC 2520 User Manual
Page 82
Fax Operation (Various Functions)
3-16
> Modifying registered information
6
If you want to modify the abbreviated number (the displayed number of the speed-dial key under
which the chain dial key is registered), press the [Abbr. #] key.
If you want to modify any other basic information, press the key that corresponds to that information.
To modify information, refer to the corresponding step under Registering New Chain Dial Keys on
page 3-13.
7
Enter the abbreviated number of an
unregistered speed-dial key (0001 -
1000).
NOTE: Once a 4-digit number is
entered, that number may be changed
using the [+] and [-] keys.
8
Press the [Close] key.
9
Once you are finished modifying all of the items that you want, press the [OK] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue modifying other chain dial keys, repeat steps 3 through 9.
10
If you are finished making settings, press the Reset key to return to the initial mode.
Dialing With a Chain Dial Key
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
If the operation involves the transmission of
documents, set the documents you want to transmit.
2
Press the desired speed-dial key that
was registered as a chain dial key.
( 4 digits)
Enter using # key.
Abbreviation
Back
Register the dial.
Chain
0003
.
0003
.
Enter Destination.
Dest
Ready for fax transmission.
Basic
Application
Abbrev.
Address
Register
book
Print Report
Memory
OCT-11
TX
setting
FREE +
.
FREE
.
ABC