Selecting the file type, Network fax settings 9-5 – TA Triumph-Adler DCC 2520 User Manual
Page 211
Network FAX Settings
9-5
Turning the Save Transmitted Documents Function ON/OFF
Perform this procedure to select whether you want to save the transmitted documents on the server
computer (the computer on which the provided Scanner File Utility is installed) or not.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Press the System Menu/Counter key. The Default
Setting screen will appear.
2
Press the [FAX Default] key.
3
Use the [T] cursor key to select Save Tx. original.
4
Press the [Change #] key.
5
Select whether you want to save the
documents or not by pressing either the
[On] or [Off] key, as appropriate.
6
Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
Selecting the File Type
Perform this procedure to select the file type in which the documents for transmission, or of received
documents, will be saved in the server computer (the computer on which the provided Scanner File
Utility is installed). The document can be saved as a PDF file or a TIFF file.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
System Menu / Counter
Save Tx. original
On
Off
Back
Default setting screen