TA Triumph-Adler DCC 2520 - Manual (Page 25)

Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-9
NOTE: The fax number can be up to 20 digits in length.
If you want to clear the currently displayed number from the message display, simply press the
Stop/Clear key.
If you want to revise the entered number, press the [] or [] cursor key to move the cursor to the
number that you want to change. Then press the [Delete] key to delete that number and enter the
correct number as desired.
4 Press the [OK] key. The message display will return to the same screen as was displayed in step 2.
5 Registering your station name
Enter the desired name for your station. (Refer to Entering Characters on page 2-15.)
NOTE: Your station name can be up to 32 characters in length.
6 In the Character input screen, press the [End] key. The message display will return to the same
screen as was displayed in step 2.
7 Registering your station ID
Use the numeric keys to enter the
desired station ID (4 digits).
NOTE: If you want to reset the displayed number to 0000, simply press the Stop/Clear key.
If you want to revise the entered number, press the [] or [] cursor key to move the cursor to the
number that you want to change. Then enter the correct number as desired.
8 Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 2.
9 If you are finished making settings, press the Reset key to return to the initial mode.
Setting the Current Date and Time (Date & Time setting)
Set the date and the time that will appear in the message display here. BE SURE that the date and
time that you set here are correct since they will serve as a basis for all communications that use the
timer.
IMPORTANT: Be sure to periodically check the time that is shown in the touch panel on the
operation panel, and adjust it to match the current time when necessary.
NOTE: Prior to operation, check the message display to make sure that the operation panel is in the
initial mode for fax operation.(Refer to What is the Initial Mode? on page 1-11.)
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode screen.
Enter using # key.
Own ID Back
Program Fax Parameter.
( 4 digits) 0000 .