TA Triumph-Adler DCC 2520 - Manual (Page 87)

Fax Operation (Various Functions)
3-21
> Modifying destination information
6 The currently registered information will be displayed.
• If you want to delete a fax number(s), press the corresponding dial key (or keys) and then go to
the next step.
• If you want to add a fax number(s), press the [Add] key and then go directly to step 9.
• If you want to change a fax number, press the corresponding dial key and then proceed directly
to step 11.
Deleting fax numbers
7 Press the [Delete] key.
8 Press the [Yes] key. The message display will return to the same screen as was displayed in step 6
and you can continue to delete, add or change other fax numbers. To do so, repeat steps 6 through
13.
If you are finished with this procedure, press the [Close] key and go to step 14.
Adding fax numbers
9 Enter the additional fax number(s).
NOTE: You can enter the fax number(s) using the numeric keys, abbreviated numbers, one-touch
keys, group dial keys and the address book. Chain dial keys can be used as well.
In order to enter multiple destinations with the numeric keys, press the [Next destinat.] ([Next dest.])
key after you enter each fax number.
10 Press the [Finish dest. Set] ([Dest. set]) key. The message display will return to the same screen as
was displayed in step 6 and you can continue to delete, add or change other fax numbers. To do so,
repeat steps 6 through 13.
If you are finished with this procedure, press the [Close] key and go to step 14.
Changing fax numbers
11 Press the [Change] key.
Close el des. Back
ommunication status.
ABC
Change
Add
Delete
Memory usage:
OCT-11-2005 16:00
1/1 .
03 .
. 0%
FREE
Enter Destination.
Reserved communication status.
book
Address
Abbrev.
Delete Space Pause Subadd.
ABC
Dest . 1
destinat.
Next
Memory
OCT-11
ABC