TA Triumph-Adler DCC 2520 - Manual (Page 194)

Various Settings and Registration
7-12
Selecting the Automatic Reception Mode (Receive Mode setting)
This fax has 2 or 3 automatic reception modes (depending upon the model version). The inch
version of this fax offers the Automatic Fax Reception, Auto FAX/TEL Switching and D.R.D.
Reception modes. The metric version contains the Automatic Fax Reception and Auto FAX/TEL
Switching modes. Select from among the available modes that are available for your fax machine.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Press the System Menu/Counter key. The Default
Setting screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] key until Receive Mode (Reception mode) is highlighted.
4 Press the [Change #] key.
5 Select the desired reception mode by
pressing either the [Fax Reception] ([Fax
Rx]) key, the [Auto Fax/Tel. SW] key or
the [D.R.D.] key, as appropriate.
NOTE: The [D.R.D.] key will not be displayed in the metric version of this fax machine.
If you selected D.R.D., go directly to step 7.
6 If you selected Fax Reception or Auto Fax/Tel. SW, press the [Close] key. If you are finished making
settings, press the Reset key to return to the initial mode.
System Menu
Default
Scanner
Default
Copy
Default
FAX
Language
Setting
MP tray
Orig. Size
Register
Management
Document
Default
Printer
Default
Machine
Accounting
Job
Management
BOX
Report
Print
System Menu / Counter
Receive Mode
Fax
Reception
Auto Fax/
Tel. SW
Default setting screen
Back
D.R.D.