TA Triumph-Adler DCC 2520 - Manual (Page 216)

Network FAX Settings
9-10
> Registering the administrator's e-mail address
10 Press the [Admin. E-mail ad.] key.
11 Press the [Admin. E-mail ad.] key.
12 Enter the administrator's e-mail address using the English alphabet, numerals or other available
symbols. (Maximum 64 digits)
NOTE: Refer to Entering Characters on page 2-15 when entering the administrator's e-mail
address. It is not possible to use the [Space] key when entering this information.
13 Once you are finished entering the administrator's e-mail address, press the [End] key. The
message display will return to the same screen as was displayed in step 11.
14 Press the [Account] key.
15 Enter the account name using the English alphabet, numerals or other available symbols.
(Maximum 64 digits)
NOTE: Refer to Entering Characters on page 2-15 when entering the account name.
16 Once you are finished entering the account name, press the [End] key. The message display will
return to the same screen as was displayed in step 11.
17 Press the [Password] key.
Regist'd contents cnf
Register Network FAX.
IP addr./
Host name
Admin.
E-mail ad.
File name
Saving
Folder No.
Receive
Transm
Receive:
Transmit: tx
rx
Regist'd contents cnf
Register administrator mail address.
Admin.
E-mail ad.
Account
Password
Regist'd contents cnf
Register administrator mail address.
Admin.
E-mail ad.
Account
Password
Regist'd contents cnf
Register administrator mail address.
Admin.
E-mail ad.
Account
Password