TA Triumph-Adler DCC 2520 - Manual (Page 149)

Other Features of this Fax
5-47
> Modifying registered information
6 If you want to change the destination fax number(s), press the [ ] key and go to the next step. If
you want to modify the abbreviated number (the displayed number of the speed-dial key under
which the program key is registered), press the [Abbr. #] key and then go directly to step 16. If you
want to modify any other basic information, press the key that corresponds to that information and
refer to Registering New Program Keys on page 5-44.
Deleting destinations
7 Press the destination that you want to
delete until it is highlighted. Multiple
selections are possible. If the destination
you want to delete is not displayed, use
the [T] and/or [S] cursor keys to switch
to the screen that displays the
destination that you want.
8 To delete the selected destination(s), press the [Delete] key and then the [Yes] key.
Adding destinations
9 Press the [Add] key.
10 Enter the additional fax number(s).
NOTE: You can enter the fax number(s) using the numeric keys, one-touch keys and the address
book. Chain dial keys can be used as well.
If you want to enter multiple fax numbers with the numeric keys, press the [Next destinat.] ([Next
dest.]) key after each fax number.
11 Once you are finished entering all of the fax numbers that you want, press the [Finish dest. Set]
([Dest. set]) key.
0001 .
Add/change/del des. Back
Register the dial.
Program Dial(Send)
ABC
Memory
OCT-11
FREE + 1236546 .
1/1 .
0003 .
03 .
0006 .
Close el des. Back
dial.
al(Send)
ABC
Change
Add
Delete
Memory usage:
OCT-11-2005 16:00
FREE + 1236546 .
1/1 .
03 .
. 0%
0006 .
FREE
Program Dial(Send)
Enter Destination.
Register the dial.
book
Address Abbrev.
Delete Space Pause Subadd.
FREE + 123568_ .
CDE ABC
GDE
0006 .
destinat.
Next
Dest 1