TA Triumph-Adler DCC 2520 - Manual (Page 208)

Network FAX Settings
9-2
Performing the Setup Procedure
In order to use the Network FAX functions, the following setup procedure needs to be performed.
Connecting the fax machine and the computer
Procedure on the fax machine
Procedure on the computer
Connect the shielded
network cable (100
BASE-TX or 10 BASE-T)
to the fax machine.
See page 9-3.
PC
Hub
Example connection
Network cable
Perform the basic settings (Network FAX
Reception setting, setting for saving the
documents for transmission, file type setting,
NW-FAX File Add.Info. setting, Network FAX
registration) on the fax machine.
See pages 9-4 ~ 9-12.
Install the required software (included in the provided CD-ROM).
Refer to the On-Line Manual
Setup is complete