TA Triumph-Adler DCC 2520 - Manual (Page 66)

Fax Operation (Basic Use)
2-30
Dialing the Same Number Again (Redialing functions)
Redialing refers to dialing the most recently dialed number once again.
Automatic Redialing
When attempting to transmit documents, etc., the other party's fax machine may be busy with
another communication and may not respond. In this type of situation, your fax machine will
automatically attempt to redial that same number.
NOTE: Automatic Redialing is performed automatically and no special operation is required.
However, you can set the number of times that redialing will be attempted to any number between 0
and 14. Refer to Setting the Number of Redial Attempts (Number of Redials setting) on page 7-9.
Automatic Redialing will not engage when documents are being transmitted in the Direct Feed
Transmission mode.
Manual Redialing
What if you try to transmit documents
but the other party's fax line is busy and
can't answer your call? In this type of
situation, you will be able to redial that
last number dialed once again by simply
pressing the [Re-dial] key.
Press the [Re-dial] key. The fax will
automatically begin redialing the most
recently dialed number.
riginal & assign destination.
. 0% for fax transmission.
Application
Abbrev.
TX
Register
Re-dial
On-hook
setting
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
OCT-11-2005 16:00