Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 103)

103
Editing Parameters
OSCILLATOR
SHORTCUT: Press and Hold the [SHIFT ] button and move the
OSCILLATOR [PITCH] or [DEPTH] sliders.
Th is Page allows you to adjust the oscillating method or pitch.
TYPE
Th is allows you to adjust the basic oscillating method.
NOTE: See page 53 “Oscillator Types And Characteristics” for
details.
Duo ................... Two oscillators at diff erent frequencies.
Unison ............. Several oscillators sounding in unison.
Sync .................. A single oscillator sounds synchronized with an “out-of-
tune” frequency.
Pulse ................ A single oscillator sound as a pulse wave.
FM ..................... Frequency modulation between two (2) operators.
Noise ................ A single oscillator sounds various types of noise.
MODIFIERS
Th ese Parameters allow you to modify various characteristics of
the Oscillators.
NOTE: See page 53 “Oscillator Types And Characteristics” for
details.
OCTAVE
Setting Range: -2 ~ ±0 ~ +2
Th is allows you to select the Octave or pitch at which the selected
Oscillator will sound.
At “0” the selected Oscillator will sound at unison or actual
pitch. “-2” will sound two octaves lower and “+2” will sound
two octaves higher.
NOTE: This Parameter is linked to the [OCTAVE] buttons on the
Control Panel.
KEY TRACK
Setting Range: ±0 ~ +100 [cents]
Th is allows you to adjust the amount of pitch change between
keys on the keyboard.
At “+100” the musical distance between any two adjacent notes
will be 100 cents or one half-step. Th
is is the normal setting.
At “+50,” the notes will be one quarter-step apart. At “0” every
note on the keyboard will sound the same pitch.
EG DEPTH
Setting Range: -64 ~ ±0 ~ +63
Th is allows you to adjust the depth of the pitch change by the
Pitch Envelope.
At “0” there is no pitch change. At “-64.” the pitch will change
down one octave. At “+63,” the pitch will change up one
octave.
FILTER
SHORTCUT: Press and Hold the [SHIFT] button and move the FILTER
[CUT OFF], [RESONANCE] or [EG DEPTH] knobs.
Th is Page allow you to adjust the harmonic content of the
sound.
MODE
Th is allows you to select the fi ltering method.
Frequency
Level[dB]
CutOff
0
-6
+1 oct
Resonance
LP12/LP24 ....... Low-Pass 12(24)dB; reduces above the Cutoff Frequency
at 12(24)dB/octave.
Frequency
Level[dB]
CutOff
0
-6
-1 oct
Resonance
HP12/HP24 ..... High-Pass 12(24)dB; reduces below the Cutoff Frequency
at 12(24)dB/octave.
CUTOFF FREQUENCY
Setting Range: 0 ~ 127
Th is allows you to adjust the Cutoff Frequency of the Filter.
RESONANCE
Setting Range: 0 ~ 127
Th is allows you to add a controlled amplifi cation to the Cutoff
Frequency, coloring the sound.
KEY TRACK
Setting Range: -64 ~ ±0 ~ +63
VEL TRACK
Setting Range: 0 ~ 127
Th ese allow you to adjust the amount the Cutoff Frequency will
change by note number / velocity.
NOTE: The Velocity Parameter in the COMBINATION Function Mode
must be “ON” (values 1 ~ 4) in order to hear the effect of
Velocity Tracking.