Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 70)

*#1 SK PRO/SK PRO-73 Owner’s Manual
70
MOVE THE CURSOR TO THE PARAMETER
Use the DIRECTION buttons to move the
cursor to the Parameter you wish to adjust. For
this example, select “DECAY FAST.”
CHANGE THE VALUE
Use the [VALUE] knob to change the selected
value. For this example, decrease the value by
turning the [VALUE] knob to the left.
NOTE: You can also change values by using the
[DEC] / [INC] buttons while Press and Hold
the [SHIFT] button.
NOTE: To change other Parameters, repeat steps
1 through 6 above.
RECORD THE PATCH
Th ese settings are “temporary,” and will not be
remembered if another Patch or Combination
is selected, or if the instrument is turned “OFF.”
To Record your settings:
1. Press the red [RECORD] button. You
will see the selected item appear in the display
(“Organ Patch” in this example”).
2. Press the “
 ” button two times to select
RECORD and press the [ENTER] button.
Your settings have been Recorded.
RETURN TO PLAY MODE
Press the [PLAY] button to return to the PLAY
Mode.