Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 78)

*#1 SK PRO/SK PRO-73 Owner’s Manual
78
PEDAL SUSTAIN SW
Settings: Off , On
Th is allows you to turn Pedal Sustain “ON” or “OFF.”
PEDAL SUSTAIN LENGTH
Setting Range: 1 ~ 5
Th is allows you to adjust the decay length of the Pedal Sustain.
NOTE: For more information about Pedal Sustain, see page 55.
EXTERNAL ZONE
External Zones allow you to control external MIDI equipment
either from the SK PRO keyboard or expanded keyboards.
Th
ere are three External Zones on the SK PRO, each of which
can be allocated to UPPER, LOWER or PEDAL Keyboards.
NOTE: External Zones are explained more fully starting on page
152.
NOTE: Using External Zones requires setting the MIDI Parameters
correctly. This can be done easily using a MIDI Template
provided for that purpose. See page 158 for more
information about MIDI Templates.
SW (Switch)
Settings: Off , On
Th is allows you to turn the selected Zone “ON” or “OFF.”
EXZ1 EXZ2 EXZ3
You can allocate External Zones by Press and Hold the
INTERNAL ZONE
SHORTCUT: Press and Hold the [PEDAL TO LOWER] or [SPLIT] button.
Th is Page allows you to adjust the Parameters for each Internal
Zone.
OCTAVE (UPPER)
OCTAVE (LOWER SPLIT)
OCTAVE (LOWER REAL)
OCTAVE
(PEDAL)
Setting Range: -2 ~ ±0 ~ +2
Th is allows you to select the Octave or pitch at which the selected
Keyboard will sound.
NOTE: These Parameters are linked with the [OCTAVE] buttons on
the Control Panel.
Th ere are two LOWER Octave Parameters. OCTAVE SPLIT
controls the LOWER Octave setting when the [SPLIT] button
is “ON.” OCTAVE REAL controls the Lower Octave setting
when using an expanded keyboard as the Lower Keyboard.
SPLIT POINT
Setting Range: C-2 ~ G8
This allows you to adjust the dividing point between the
LOWER Keyboard and UPPER Keyboard.
NOTE: The SPLIT must be active (LED “ON”)
PEDAL KEY MONO/POLY
Th is allows you to adjust whether the Pedals play single notes
(“Mono”) or multiple notes (“Poly”).
Mono ............... If more than one note is played, the lowest note will sound
Poly ................... If more than one note is played, all notes will sound
PEDAL TO LOWER LIMIT
Setting Range: -2C ~ 8G
This allows you to adjust the highest note of the LOWER
Keyboard if the [PEDAL TO LOWER] feature is “ON.”
PEDAL TO LOWER MODE
"
"
C
E
C
inverted
Lowest Poly Chord
Lower
Pedal
Th is allows you to select how the PEDAL TO LOWER responds
to notes played (see the illustration above).
Lowest ............. Sounds lowest note.
Poly ................... Sounds polyphonic notes.
Chord ............... Sounds the root of the chord.
COMBINATION - continued