Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 163)

163
Using Memory
FORMAT
Th is FUNCTION Mode allows you to format a USB Flash Drive for use with the SK PRO.
NOTE: Formatting a USB Flash Drive erases all data on the drive. Therefore, be sure to use either a new
Drive or one which does not already have data you want to keep.
INSERT A USB FLASH DRIVE
Turn the power to the SK PRO “ON” and insert a USB Flash Drive to the
[TO FLASH DRIVE] Port. The message, “Confirming USB...” will display for
approximately 1 second. Please wait for this message to disappear.
LOCATE THE FORMAT PAGE
[MENU/EXIT] -
FILE
-
FORMAT
- [ENTER].
SELECT THE MEDIA
Use the [VALUE] knob to select “USB Flash Drive.”
FORMAT THE USB FLASH DRIVE
Use the DIRECTION [  ]button to move the cursor to the [FORMAT] icon and
press the [ENTER] button. Th e message, “Formatting” will display and the formatting
process begins. Th e time necessary to Format a USB Flash Drive may diff er depending
on the capacity of the Drive, but typically it will be approximately 1 or 2 seconds.
When the Format has fi nished, “Completed” will show in the display.
NOTE: Do not turn the power “OFF” or remove the USB Flash Drive during the Formatting
procedure.
NOTE: If you DO NOT wish to Format, press the [MENU/EXIT] or [PLAY] button instead of the
[ENTER] button.
FORMATTING MEDIA
Under Step 3, you can select either “USB Flash
Drive” or “Internal Memory” (explained later) as the
media you wish to use.
The Format procedures between “USB Flash Drive”
and “Internal Memory.” are diff erent. For “USB Flash
Drive,” all data is deleted from the Drive and a File
Structure is created. For “Internal Memory,” all fi les
are deleted but no File Structure is generated.