Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 32)

*#1 SK PRO/SK PRO-73 Owner’s Manual
32
CREATING AN ORGAN PATCH
Th e ORGAN Section can be registered for vintage Hammond Organ sounds, Combo Organs, and
Pipe Organs. Th is is explained in more detail starting below.
SELECT [MANUAL]
Normally, one of the [FAVORITE] buttons is “ON” (LED lit), indicating that a
Combination is selected. However, if you want to de-select Combinations and use the
front panel controls entirely to control the sound, turn the [MANUAL] button “ON.”
Th
e [FAVORITE] buttons will all turn “OFF” and all sounds and features of the SK
PRO will be controlled by the front panel controls as well as by the settings from the
Menus.
INITIALIZE “MANUAL”
Some Parameters may not be set the way you wish even if [MANUAL] is selected. If
you encounter this, you can initialize the MANUAL Parameters. See page 29 for
instructions on how to do this.
NOTE: The MANUAL feature is explained in more detail on page 29.
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
ALLOCATE THE SECTION TO A KEYBOARD
If the LED on the [ORGAN] button in the [ALLOCATE] button
is not “red” or “orange,” press the [ORGAN] button repeatedly until
the LED lights red or orange.
NOTE: See page 54 for instructions on allocating a Section to another
Keyboard.
SELECT 3 PART ORGAN
Th e ORGAN Section has 3 Parts - UPPER, LOWER and PEDAL.
Th e [3 PART ORGAN] button selects how the 3 Parts are allocated.
When “ON” (LED lit) the Upper, Lower and PEDAL Parts are
allocated automatically. When “OFF” (LED not lit) the UPPER
Part will play on the entire keyboard but the LOWER and PEDAL
[ALLOCATE] button group buttons can still be used to allocate the
entire ORGAN Section to the Lower or PEDAL Parts.
SELECT THE ORGAN TYPE
Select the ORGAN Type most appropriate to the musical style
you wish to play.
Use the DIRECTION buttons to move the cursor to “ORGAN
TYPE - UPPER&LOWER.”
Use the [VALUE] knob to select the ORGAN Type.