Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 167)

167
Using Memory
LOAD
Th is FUNCTION Mode allows you to Load fi les saved to a USB Flash Drive or Internal Memory into the instrument.
INSERT A USB FLASH DRIVE
Insert a formatted USB Flash Drive into the [TO FLASH
DRIVE] Port.
NOTE: If you are deleting an item from Internal Memory you may
skip this step. “USB Flash Drive” will display to the right of
“MEDIA” only if a USB Flash Drive has been inserted into the
[TO FLASH DRIVE] Port.
LOCATE THE “LOAD” PAGE
[MENU/EXIT] - FILE - LOAD - [ENTER]
SELECT THE ITEM TO LOAD
MEDIA
Use the [VALUE] knob to select the media from which to Load.
Internal Memory ........... Internal Memory.
USB Flash Drive .............. USB Flash Drive.
CONTENT
Use the DIRECTION [

] button to move the cursor to
[CONTENT] and use the [VALUE] knob to select the type of
content to Load.
Setup ................................... Setup fi le.
Organ Patch ..................... Patch in the ORGAN Section.
Piano/Ens Patch ............. Patch in the PIANO/ENSEMBLE Section.
Synth Patch ...................... Patch in the MONO SYNTH Section.
Tone Wheel ....................... Custom Tone Wheel.
Pipe ...................................... Custom Pipe.
FILE
Use the DIRECTION [  ] button to move the cursor to [FILE]
and use the [VALUE] knob to select the fi le to Load.
TO
Use the DIRECTION [  ] button to move the cursor to [TO]
and use the [VALUE] knob to select where to Load the fi le.
LOAD
Use the DIRECTION [  ] button to move the cursor to
[LOAD and press the [ENTER] button. Th e message below will
display for approximately 1 second:
NOTE: Do not turn the power “OFF” while the above message is
displaying.
NOTE: If you DO NOT wish to Load, press the [MENU/EXIT] or [PLAY]
button instead of the [ENTER] button.
RETURN TO THE PLAY MODE
Press the [PLAY] button to return to the PLAY mode.