Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 139)

139
Editing Parameters
PATCH LOAD
Th is FUNCTION Mode allows you to select which Parameters of the instrument will be Recalled as part of a Patch.
To locate this mode:
[MENU/EXIT] - SYSTEM - PATCH LOAD - [ENTER]
All the Parameters described here have “ON” and “OFF” settings.
On ...................... The Parameter setting will be remembered as part of a Patch
Off ..................... The Parameter setting will not be remembered as part of a Patch.
COMBI PATCH LOAD
Th is Page allows you to select which Parameters to include as part of a Combination.
ORGAN ............................... ORGAN Section.
PIANO ................................. PIANO Section.
ENSEMBLE ........................ ENSEMBLE Section.
SYNTH ................................. MONO SYNTH Section.
INT. ZONE ......................... Internal Zones.
EXT. ZONE ........................ External Zones.
REVERB ............................... Reverb eff ect.
ORGAN PATCH LOAD
Th is Page allows you to select which Parameters to include as part of an ORGAN Patch.
REG. UPPER ...................... UPPER Drawbar Registration.
REG. L/P .............................. LOWER and PEDAL Drawbar Registrations.
DB PARAM ........................ General ORGAN Section Parameters such as Drawbar (except Drawbar
Registration), Contact & Sustain.
ANIMATION ...................... Vibrato and Chorus, Leslie.
PERCUSSION .................... Percussion Parameters.
EFFECT ................................ Matching Transformer, Overdrive, Multi Eff ects 1&2, Equalizer.
PATCH LOAD EXAMPLE
When a Combination is selected,
Example 1: On a vintage B-3/C-3/A-100, changing
an Upper Preset will change only the Drawbar
registration for the Upper Manual. To replicate this
on the SK PRO, turn the ORGAN and REG. UPPER
Parameters “ON” and turn all the other Parameters
“OFF.”
Example 2: To change the other Voice Sections
except ORGAN, turn the ORGAN Parameter “OFF”
and turn the other Voice Section Parameters “ON.”
NOTE: The Parameters in this Mode are System
Parameters. You must Record these
Parameters if you want their settings
to be remembered the nex t time
the instrument is turned “ON.” See
page143 for instructions on how to do
this.