Wah-wah, Frequency level – Hammond SK Pro-73 73-Key Portable Keyboard/Organ User Manual
Page 108
*#1
SK PRO/SK PRO-73 Owner’s Manual
108
Wah-Wah
SOURCE
Settings: Mod, Exp, LFO, Input
Th
is allows you to select how to modulate the Wah-Wah eff ect.
Mod
............Allows you to use the [MODULATION] wheel.
Exp
..............Allows you to use the Expression Pedal.
LFO
.............A
llows a cyclical modulation using a dedicated LFO-Low Frequency Oscillator.
Input
..........Allows you to use the input audio envelope of the sound engine.
SENSITIVITY
Setting Range:
0 ~ 127
Th
is allows you to adjust the sensitivity or width of the eff ect.
A higher value results in a wider dynamic response.
RESONANCE
Setting Range:
0 ~ 127
Th
is allows you to boost the cut-off frequency of the Low-Pass Filter and create a more
pronounced “Wah” eff ect.
A higher value results in a greater resonance.
FREQUENCY
Setting Range:
0 ~ 127
Th
is allows you to adjust the central frequency.
A higher value increases the frequency.
LFO
WAVEFORM
Settings: Triangle, Square, Saw Down, S & H
Th
is allows you to select the waveform of the LFO.
Triangle
.......... Triangle wave.
Square
............. Square wave.
Saw Down
...... Sawtooth Downward wave.
S & H
................. Sample and Hold.
NOTE: The SOURCE must be set to “LFO” to use this Parameter.
LFO
RATE
Setting Range:
0 ~ 127
Th
is allows you to adjust the rate of the LFO.
A higher value results in a faster rate.
NOTE: The SOURCE must be set to “LFO” to use this Parameter.
Frequency
Level
Waveform,
Rate
Resonance
Sensitivity
Modulation
Source