Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 145)

145
Editing Parameters
DEFAULT
Th is FUNCTION Mode allows you to reset the SK PRO to factory-default settings.
TO LOCATE THIS MODE:
[MENU/EXIT] -
SYSTEM
-
DEFAULT
- [ENTER]
To reset the instrument to the factory-default settings, do the following:
CONTENT
From the above screen, use the [VALUE] knob to select the content to be initialized.
System .......................................... System Parameters.
All ................................................... All the contents.
DEFAULT
Use the DIRECTION [

] button to move the cursor to the [DEFAULT] icon
and press the [ENTER] button. The display will show “Loading Default...” for
approximately 1 second. When the message “Loading Default...” disappears, the
Default procedure is complete and the DEFAULT Page will reappear.
NOTE: If you DO NOT wish to Default the instrument,, press the [MENU/EXIT] or [PLAY]
button instead of the [ENTER] button.
.
CAUTION
Do not turn the power “OFF” while the above message is displaying. Doing so
may cause a malfunction.