Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 94)

*#1 SK PRO/SK PRO-73 Owner’s Manual
94
COMPONENT - OSCILLATOR
WAVEFORM CATEGORY
Th is allows you to select the Waveform Category.
1 ......................... A. Piano
2 ......................... E. Piano
3 ......................... Harpsichord
4 ......................... Clav.
5 ......................... Chromatic Percussion
6 ......................... Guitar
7 ......................... Ethnic
8 ......................... SFX
9 ......................... Wind
10 ....................... Strings
11 ....................... Choir
12 ....................... Synth Pad
13 ....................... Bass
14 ....................... Synth Lead
15 ....................... Free Reed
16 ....................... Percussion
WAVEFORM NUMBER
Th is allows you to select a specifi c Waveform Number.
NOTE: See page 178 for a list of Waveform Numbers.
TRANSPOSE
Setting Range: -63 ~ ±0 ~ +63 [semitones]
Th is allows you to adjust the sounding pitch of the selected
Component by half-steps or semitones.
PITCH BEND SWITCH
Settings: Off , On
Th is allows you to select whether the selected Component will
receive Pitch Bend.
Off ..................... Does not receive.
On ...................... Receives.
PITCH KEY TRACK
Setting Range: -100 ~ ±0 ~ +100 [%]
Th is allows you to adjust the amount of pitch change between
keys on the keyboard for the selected Component.
At “+100” the musical distance between any two adjacent notes
will be 100 cents or one half-step. Th
is is the normal setting. At
“+50,” the notes will be one quarter-step apart.
At “0” every note on the keyboard will sound the same pitch.
FINE TUNE
Setting Range: -100 ~ ±0 ~ +100 [cents]
Th is allows you to adjust the sounding pitch of the selected
Component by cents.
At “-100” the pitch will be one half-step fl at. At “+100” the
pitch will be one half-step sharp.
STRETCH TUNE DEPTH
Cent
Note
±0
+10
-10
+20
+30
-20
-30
Middle A
Setting Range: 0 ~ 127
Th is allows you to adjust the depth of the Stretch Tuning for the
selected Component.
“0” is Equal Temperament. If the value is increased, the bass will
sound lower and the treble will sound higher.
NOTE: “Stretch tuning” is a method of tuning stringed instruments
( n o t a b l y p i a n o) t o co m p e n s at e fo r t h e i r i n h e re nt
inharmonicity. This characteristic can diff er from instrument
to instrument.
PITCH EG DEPTH
Setting Range: -64 ~ ±0 ~ +63
Th is allows you to adjust the depth of the pitch changing of the
Pitch EG (Envelope Generator) for the selected Component.
At “0” there is no pitch change. At “-64” or “+63,” the pitch will
change down or up by one octave.
NOTE: A large amount of pitch change may produce artifacts such as
“step noise.”
PITCH EG VEL TRACK
Setting Range: 0 ~ 100(%)
Th is allows you to adjust the depth of the pitch changing of the
Pitch EG for the selected Component by keyboard velocity.
At “0” there is no change by key velocity. At “100” the pitch will
change by a wide amount.
NOTE: The Pitch EG is explained in more detail on the next page.
PIANO/ENSEMBLE - continued