Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 128)

*#1 SK PRO/SK PRO-73 Owner’s Manual
128
RECORDING A CUSTOM SETTING
To Record a Custom Setting, do the following:
PRESS THE RED [RECORD] BUTTON
After you have made your changes to a Custom Setting, press the
red [RECORD] button. Th
e RECORD Page will display.
SELECT THE ITEM TO RECORD
TO
Use the [VALUE] knob to select the User Number to Record.
NOTE: You can also select a User Number by using the numbered
[FAVORITE] buttons to type in the number and pressing the
[ENTER] button.
NOTE: If edits have been made to a Custom Setting, an “E” will
appear to the right of the CONTENT icon.
NOTE: You CANNOT Record to an “F” setting.
RECORD
After you have selected the User Number, press the red
[RECORD] button. Th
e Naming screen will display.
NAME THE CUSTOM SETTING
Enter the Name.
[Aa1] ................. Changes the character type.
[1] - [10] .......... Selects the highlighted character.
[Insert] ............ Inserts a space at the cursor.
[Delete] ........... Deletes a letter at the cursor.
[VALUE] ........... Changes the letter at the cursor.
RECORD THE SETTING
After Naming your Custom Setting, press the [ENTER] button.
The message shown below will display for approximately 1
second:
NOTE: Do not turn the power “OFF” while the above message is
displaying.
NOTE: If you DO NOT wish to Record, press the [MENU/EXIT] button
instead of the [ENTER] button.
RETURN TO THE PLAY MODE
Press the [PLAY] button to return to the PLAY mode.