Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 17)

17
Making the Connections
TW / Tr Organ
Rotary Sound Organ Stationary and the
other sound
Audio Equipment
BASIC CONNECTION
3-CHANNEL TYPE (2101/mk2)
1. Connect the SK PRO to the Leslie Speaker via an 11-pin Leslie cable (optional LC-
11-7M, not included).
2. Turn the power to the SK PRO “ON” and set the EXT. LESLIE CH Parameter to
“3.”
3. Make sure a Hammond Tone Wheel Organ ( A-100 , B-3 , C-3 , or Mellow ) is
selected.
4. Press the [BYPASS] button “ON” and set the [STATIONARY VOLUME] of the
Leslie Speaker at a desired level.
5. Press the [BYPASS] button “OFF” while playing, and set the [ROTARY
VOLUME] of the Leslie Speaker at the same audible level as the [STATIONARY]
Channel.
SINGLE-CHANNEL TYPE (122XB, 981, 3300/W)
1. Connect the SK PRO to the Leslie Speaker via an 11-pin Leslie cable (optional LC-
11-7M, not included). Th is will allow you to hear the Drawbar ORGAN sounds.
2. Connect the SK PRO to a keyboard amp or powered speakers via 1/4” audio cables
from the LINE OUT jacks of the SK PRO.
3. Turn the power to the SK PRO “ON” and set the EXT. LESLIE CH Parameter at
“1+LINE.”
4. Make sure a Tone Wheel Organ ( A-100 , B-3 , C-3 , or Mellow ) is selected.
5. Press the [BYPASS] button “ON” and set the audio equipment at a desired level.
6. Press the [BYPASS] button “OFF” and set the Volume of the connected Leslie
Speaker at the same audible level as when the [BYPASS] button is “OFF.”
LESLIE SPEAKERS TO CONNECT
The SK PRO/SK PRO-73 is designed to connect with
3-channel Leslie Speakers such as the 2101/mk2.
It is also possible to connect a single-channel
Leslie Speaker such as a 122XB, 981 or 3300/W;
however, a single-channel Leslie will reproduce the
Drawbar ORGAN sounds only. To hear the PIANO/
ENSEMBLE/SYNTH voices, connect an additional
sound source such as a keyboard amp or powered
speakers via the LINE OUT jacks.
LESLIE CHANNELS
3-channel Leslie Speakers are equipped with
a stereo speaker system, independent of the
Rotary channel, to provide separate channels for
the Rotary (ORGAN) channel and the Stationary
(PIANO, ENSEMBLE and MONO SYNTH) channel.
A traditional single-channel Leslie Speaker, such
as a 122, 981 or 3300/W has no stationary speaker
system, thus requiring a separate amplifi er/speaker
for other sounds such as PIANO, ENSEMBLE and
MONO SYNTH.
CONNECTING A LESLIE SPEAKER
A Leslie Speaker Cabinet with an 11-pin interface can be directly connected to the SK PRO/SK PRO-73.
NOTE: Be sure the power to the SK PRO is “OFF” before connecting the Leslie Speaker.
Connecting a single-channel Leslie Speaker Connecting a 3-channel Leslie Speaker