Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 13)

13
Introduction
AUDIO INPUT JACK
AUX IN jack
Use this jack to connect an external audio source. When
connected, the sound will be mixed with the internal keyboard
sounds and sent out to the LINE OUT jacks and the Stationary
channel of a multi-channel Leslie Speaker via the 11-pin socket
(P. 19).
AUX LEVEL knob
Adjusts the volume of the sound coming in from the AUX IN
jack.
CONTROLLER JACKS
FOOT SWITCH 1 jack
FOOT SWITCH 2 jack
Use these jacks to connect Foot Switches to control a functions
such as Leslie speeds or change Combinations.
Th
e recommended Foot Switches are listed below;
HAMMOND ... FS-9H, VFP1
BOSS ................ FS-5U
YAMAHA ......... FC4A, FC5
In addition, the FS-10TL Leslie Switch (not available in Europe)
can be connected to the FOOT SWITCH 1 jack.
EXP PEDAL jack
Use this jack to connect an Expression Pedal to control volume
while playing.
Th
e recommended Expression Pedals are listed below:
HAMMOND ... EXP-50J, EXP-20, V-20H, V-20R; NORM
KORG ................ XVP-10, XVP-20; REV
ROLAND ......... EV-5; NORM
YAMAHA ......... FC7; REV
DAMPER PEDAL jack
Use this jack to connect a Damper Pedal (Sustain Pedal) for
holding notes when keys are played and released.
Th
e recommended Damper Pedals are listed below:
HAMMOND ... FS-9H, VFP1
ROLAND ......... DP-10
YAMAHA ......... FC3A, FC4A, FC5
MIDI PORTS
MIDI OUT Port
Transmits MIDI data to a connected MIDI device.
MIDI IN Port
Receives MIDI date from a connected MIDI device. Th is port
can be programmed for a LOWER Keyboard or a Pedalboard.
USB PORTS
USB TO HOST Port
Use to connect to a computer to transmit MIDI messages or
Load and Save fi les such as Setups or Update fi les.
USB FLASH DRIVE Port
Use to connect a USB Flash Drive to Load or Save fi les such as
Setup or Update fi les.