Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 137)

137
Editing Parameters
NOTE: The Parameters in this Mode are System
Parameters. You must Record these
Parameters if you want their settings
to be remembered the nex t time
the instrument is turned “ON.” See
page143 for instructions on how to do
this.
PANEL
Th is Page allows you to adjust the performance of the various controls on the Control
Panel.
OCT / XPOSE - ORGAN
OCT / XPOSE - PIANO
OCT / XPOSE - ENSEMBLE
OCT / XPOSE - SYNTH
Setting Range: Every, Next
Th ese allow you to adjust how the OCTAVE [DOWN] [UP] buttons control Octave
selection or Transposition.
Every ................ The Octave or Transposition will change while keys are pressed and held.
Next .................. If a key or keys are pressed and held and the Octave or Transposition is changed, the
key(s) must be released and pressed again before the Octave or Transposition takes
eff ect.
ALLOCATE MODE
Settings: Additive, X-Cancel
Th is allows you to select the performance of the [ALLOCATE] buttons.
Additive .......... The [ALLOCATE] buttons will turn “ON” and “OFF” individually.
X-Cancel ......... “Cross-Canceling” - When one [ALLOCATE} button is turned “ON,” any other
[ALLOCATE] buttons that are “ON” will turn “OFF.” If an [ALLOCATE] button is already
“ON,” Press and Hold it while turning another [ALLOCATE] button “ON” will light both
buttons.
KNOB / SLIDER MODE
Settings: Mom, Access
Th is allows you to adjust how a value is aff ected when a knob or slider is moved.
Mom ................. When a knob or slider is moved, the value will change immediately.
Across .............. When a knob or slider is moved the value will not change until the current value
is arrived at by the movement of the knob or slider, at which point the value will
change.
3 PART ORGAN ALLOCATE
Settings: No, All On
This allows you to select how the [3 PART ORGAN] button interacts with the
[ALLOCATE] [ORGAN] button.
No ...................... The [3 PART ORGAN] button has no eff ect to the [ALLOCATE] [ORGAN] button.
All On ............... When the [3 PART ORGAN] button is turned “ON,”, all ORGAN Parts turn “ON,” the
[SPLIT] button turns “ON” and other Voice Sections are turned “OFF.”
USING “MOM” AND “ACROSS”
When “Mom” is selected and a knob or slider is
moved, the value changes instantly. However,
there may be occasions when you want a value
to change gradually instead of suddenly. Select
“Across” to change values gradually. This is
especially helpful when selecting Patches since
you can use “Across” to “morph” one Patch into
another.