Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 125)

125
Editing Parameters
Rotor
Speed:
Rise
Time Fall
Time Brake
Time
Mode: SLOW FAST SLOW FAST STOP
Delay
Time
FAST SPEED - HORN / DRUM (L)
Setting Range: 0, 200 ~ 500 [rpm]
Th ese allow you to set the rotor speed for the “FAST” or Tremolo
Mode.
RISE TIME - HORN / DRUM (L)
Setting Range: 0.8 ~ 12.5 [sec] (Horn)
1.0 ~ 12.5 [sec] (Drum)
Th ese allow you to adjust the time for the rotors to “ramp up”
to “FAST” Mode when switching from ‘SLOW’ or ‘STOP” to
‘FAST’ Mode.
FALL TIME - HORN / DRUM (L)
Setting Range: 0.8 ~ 12.5 [sec] (Horn)
1.0 ~ 12.5 [sec] (Drum)
Th ese allows you to adjust the time for the rotor to reach the ‘SLOW” rotor speed when
switching from “FAST” to “SLOW” Mode.
BRAKE TIME - HORN / DRUM (L)
Setting Range: 0.8 ~ 12.5 [sec] (Horn)
1.0 ~ 12.5 [sec] (Drum)
Th is allows you to adjust the time for the rotor to Stop when switching from “FAST
to “STOP” Mode.
DELAY TIME - HORN / DRUM (L)
Setting Range: 0.0 ~ 1.0 [sec]
Th ese allow you to adjust the time to start changing the speed when the
Mode is switched.
MICROPHONE SETTINGS
Th ese Parameters allow you to replicate various Microphone placements
of a Leslie Speaker Cabinet.
LEVEL - HORN / DRUM / SUB BASS (L)
Setting Range: -INF, -76 ~ 0 [dB]
Th ese allow you to adjust the volume levels of the Horn Rotor, Drum Rotor
and Sub Bass
NOTE: The Sub Bass sound is “dry” - not modulated.
WIDTH - HORN / DRUM (L)
Setting Range: 0 ~ 40 [cm]
Th ese allow you to adjust the distance between Left and Right Microphones.
At “0” there is no separation.
A higher value will increase the stereo separation.
CENTER - HORN / DRUM (L)
Setting Range: -50 ~ +50 [cm]
Th is allows you to adjust the off set between the center of two microphones and the
pivot of the rotor.
On a Leslie Speaker Cabinet the Horn Rotor rotates counter-clockwise and the Drum
Rotor rotates clockwise. Th
e digital Leslie replicates this feature. To emphasize the
‘approaching the opening of the rotor’, set a ‘+’ value for the Horn rotor, and a ‘-’ value
for the Drum rotor.
DISTANCE - HORN / DRUM (L)
Setting Range: 30 ~ 200 [cm]
These are for replicating distance settings between a Leslie Speaker and the
microphones. A lower value results in a deeper eff ect.
Distanc
e
Sub Bass
Drum Rotor
Horn Rotor
Cente
r
Width
WHAT IS THAT “TIME” BASED ON?
It is diff erent that the “TIME” between a Mode
to a Mode of the Leslie eff ect by the speed at
that time.
On this instrument, the “TIME” is displayed
based on changing speed between 40 rpm
and 400 rpm.
NOTE: The Parameters labeled “L” are Leslie
Parameters. You must Record these
P a r a m e t e r s t o a C u s t o m L e s l i e
Cabinet if you want their settings
to be remembered the next time the
instrument is turned “ON.” See page
128 for instructions on how to do this.