Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 60)

*#1 SK PRO/SK PRO-73 Owner’s Manual
60
R E CO R D I N G T H E C U R R E N T
SETTINGS TO A BUNDLE
You can record up to 100 BUNDLEs from “1-1” to “10-10.”
Th
e fi rst digits are the BANK Number and the last digits are
the BUNDLE Number. Th e fi rst and last digits are separated
by a hyphen.
SELECT THE BANK
Press and Hold the [BANK] button and press a [NUMBER]
button to select a “BANK.”
NOTE: You can skip this step if you want to record to the Bank al-
ready selected (shown following “FAV.” on the display).
Th e LEDs of the [NUMBER] buttons will all fl ash.
SELECT THE NUMBER
Press and Hold the [RECORD] button and press a [NUMBER]
button to record as “NUMBER.” Th
is is where your setting
will be stored.
Th
e NAME dialog box will open.
NAME THE BUNDLE
Enter the Name.
[Aa1] ................. Changes the character type.
[1] - [10] .......... Selects the highlighted character.
[Insert] ............ Inserts a space at the cursor.
[Delete] ........... Deletes a letter at the cursor.
[VALUE] ........... Changes the letter at the cursor.
After you are fi nished Naming, press the [ENTER] button.
Th e message shown above will display for approximately 1
second.
Press and Hold the [BANK] button and press a [NUMBER]
button to select a “BANK.”
NOTE: You can skip this step if you want to recall the Bank already
selected (shown following “FAV.” on the display).
Th e LEDs of the [NUMBER] buttons will all fl ash.
SELECT THE NUMBER
Press a [NUMBER] button to recall the “NUMBER.”
Th
e BANK and NUMBER have been selected and the selected
BUNDLE will be recalled.
RECALL A BUNDLE
To recall a BUNDLE you have Recorded, do the following:
SELECT THE BANK
RECORDING BUNDLES QUICKLY - continued