Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 67)

67
Using the Display
MENU MODE CONTENTS
PATCH
COMBINATION (P. 74)
Th is allows you to edit the current Combination.
ORGAN (P. 80)
Th is allows you to edit the current registration in the ORGAN
Section.
PIANO (P. 90)
Th is allows you to edit the currently selected voice in the PIANO
Section.
ENSEMBLE (P. 90)
Th is allows you to edit the currently selected voice in the ENSEMBLE
Section.
SYNTH (P. 100)
Th is allows you to edit the current MONO SYNTH Parameters.
CUSTOM
TONE WHEEL (P. 120)
Th is allows you to edit the characteristics of the Tone Wheel Organ.
PEDAL REG. (P. 123)
Th is allows you to edit the harmonics used by the Pedal Drawbars of
the Tone Wheel Organ.
LESLIE (P. 124)
Th is allows you to edit the inbuilt digital Leslie.
PIPE (P. 126)
Th is allows you to select and edit each Pipe Organ Stop.
SYSTEM
SOUND (P. 130)
This allows you to adjust Master Tune, Transpose, and Master
Equalizer.
AUDIO (P. 131)
Th is allows you to adjust the audio confi guration between Voice
Sections and output jacks.
CONTROL (P. 132)
Th is allows you to adjust the Parameters for the various controllers
such as Foot Switch, Expression Pedal, Display and Keyboard.
PATCH LOAD (P. 139)
This allows you to select which contents are loaded when a
Combination is selected.
FAVORITE (P. 140)
Allows you select and edit Favorites.
MIDI (P. 158)
Th is allows you to adjust MIDI Channels, and various messages for
the MIDI port and the USB MIDI.
GLOBAL (P. 142)
Th is allows you to adjust the Auto Power Off time and select USB
Mass Storage.
DELETE (P. 144)
Th is allows you to delete “U” (User) contents.
DEFAULT (P. 145)
Th is allows you to initialize all or part of the SK PRO to factory
settings.
INFORMATION (P. 146)
Th is allows you to see which jacks on the Rear Panel are
currently active and which version of software is currently
installed. Also allows you to update the software.
FILE
LOAD (P. 167)
Th is allows you to Load Setups, Patches or Custom File from
either an external device such as a USB Flash drive or the
Internal Memory into the instrument.
SAVE (P. 166)
Th is allows you to Save Setups, Patches, Custom Files, etc.,
either to an external device such as a USB Flash drive or the
Internal Memory into the instrument.
DELETE (P. 168)
Th is allows you to Delete Setups, Patches or Custom Files,
either from an external device such as a USB Flash drive or
from the Internal Memory of the instrument.
FORMAT (P. 163)
Th is allows you to initialize either an external device such as
a USB Flash drive or the Internal Memory of the instrument.