Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 93)

93
Editing Parameters
PITCH DEPTH
PITCH MOD DEPTH
FILTER DEPTH
FILTER MOD DEPTH
AMPLITUDE DEPTH
AMPLITUDE MOD DEPTH
Th ese Parameters allow you to adjust the LFO depth for each
Component. “MOD DEPTH” sets the maximum LFO depth
using the [MODULATION] wheel.
COMPONENT
To edit a Component, select the COMPONENT - EDIT icon and
press the [ENTER] button.
COMPONENT - BASIC
SWITCH
Settings: Off , On
Th is allows you to turn the selected Component “ON” or “OFF.”
Off ...............No Sound.
On ................Sound.
Use the COMPONENT [1] [2] [3] and [4] buttons to turn each
individual Component “ON” or “OFF” while editing.
VOLUME
Setting Range: 0 ~ 127
Th is allows you to adjust the Volume of the selected Component.
OUTPUT BUS
Settings: Dry, Eff ect
Th is allows you to select whether Section Eff ects are enabled or
disabled for this Component.
Dry .................... Disabled
Eff ect ................ Enabled
KEY RANGE LOW, HIGH
Setting Range: -2C ~ 8G
Th ese allows you to adjust the sounding range of the selected
Component by note number.
VELOCITY RANGE LOW, HIGH
Value
Range
0 32 64 96 127
127
96
64
32
Setting Range: 1 ~ 127
Th ese allows you to adjust the sounding range of the selected
Component.
VELOCITY OFFSET
Input
Output
0 32 64 96 127
127
96
64
32
+32
±0
-32
Setting Range: -64 ~ ±0 ~ +63
Th is allows you to adjust the relative loudness of notes played
using the selected Component.
VELOCITY DEPTH
Input
Output
0 32 64 96 127
127
96
64
32
200%
100%
50%
0%
Setting Range: 0 ~ 200 [%]
Th is allows you to adjust the response of the selected Component
to key velocity.
At “0” there is no change in velocity. At “127,” the volume is
changed by the maximum amount in proportion to the velocity.
WHAT IS A “COMPONENT?”
There are 300 pre-programmed Patches for the PIANO and ENSEMBLE
Voices Sections. Several of these contain multiple waveforms, such as
“Nylon&Steel Gtrs” and “Section Str. Oct.” This is possible because each
individual Patch can contain up to four (4) sounding Components. Each
Component can contain a Waveform and can be edited separately,
though it is not necessary for each Component to be active as part of a
Patch. The Component Parameters are explained starting on this page.