Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 166)

*#1 SK PRO/SK PRO-73 Owner’s Manual
166
SAVE
Th is FUNCTION Mode allows you to save contents in the SK PRO to a USB Flash Drive or Internal Memory.
INSERT A USB FLASH DRIVE
Insert a formatted USB Flash Drive into the [TO FLASH
DRIVE] Port.
NOTE: If you are saving an item to the Internal Memory you may
skip this step. “USB Flash Drive” will display to the right of
“MEDIA” only if a USB Flash Drive has been inserted into the
[TO FLASH DRIVE] Port.
LOCATE THE “SAVE” PAGE
[MENU/EXIT] -
FILE
-
SAVE
- [ENTER].
SELECT THE ITEM TO SAVE
MEDIA
Use the [VALUE] knob to select the media to which to Save.
Internal Memory ........... Internal Memory.
USB Flash Drive .............. USB Flash Drive.
CONTENT
Use the DIRECTION [  ] button to move the cursor to
[CONTENT] and use the [VALUE] knob to select the type of
content to Save.
Setup ................................... Setup fi le.
Organ Patch ..................... Patch in the ORGAN Section.
Piano/Ens Patch ............. Patch in the PIANO/ENSEMBLE Section.
Synth Patch ...................... Patch in the MONO SYNTH Section.
Tone Wheel ....................... Custom Tone Wheel.
Pipe ...................................... Custom Pipe.
FILE
Use the DIRECTION [  ] button to move the cursor to [FILE]
and use the [VALUE] knob to select the fi le to Save.
TO
Use the DIRECTION [  ] button to move the cursor to [TO]
and use the [VALUE] knob to select the location to which
to Save the selected file. Choose its number if you wish to
overwritten the fi le, and choose “New File” for save as a new fi le.
SAVE
Use the DIRECTION [  ] button to move the cursor to
[LOAD and press the [ENTER] button.
NAME THE FILE
Enter the Name.
[Aa1] ................. Changes the character type.
[1] - [10] .......... Selects the highlighted character.
[Insert] ............ Inserts a space at the cursor.
[Delete] ........... Deletes a letter at the cursor.
[VALUE] ........... Changes the letter at the cursor.
After you have fi nished Naming your fi le, press the [ENTER]
button. Th
e message below will display for approximately 1
second:
NOTE: Do not turn the power “OFF” while the above message is
displaying.
NOTE: If you DO NOT wish to Save, press the [MENU/EXIT] button
instead of the [ENTER] button.
RETURN TO THE PLAY MODE
Press the [PLAY] button to return to the PLAY mode.
SETUP NAMES
A Setup Name will appear on both Internal
Memory and a USB Flash Drive. This is useful for
ease of identifi cation from an external computer.
However, the SK PRO display will not show Setup
Names. If a Setup is loaded, the Combinations and
Patches contained in the Setup will show in the SK
PRO display.