Custom leslie, Cabinet number, Speaker – Hammond SK Pro-73 73-Key Portable Keyboard/Organ User Manual
Page 124: Rotor, Cabinet number speaker rotor, 1 #2 #3 cabinet number
*#1
SK PRO/SK PRO-73 Owner’s Manual
124
CUSTOM LESLIE
#1
#2
#3
CABINET NUMBER
CUSTOM CABINET
Setting Range:
F1 ~ F8
Th
is allows you to select the Cabinet Number to edit.
The letter “F” stands for Factory (non-re-writable) and “U” stands for User (re-
writable).
SPEAKER
SPEAKER (L)
Setting Range:
L145 Front, L145 Rear, L147 Front, L147 Rear, L122 Front, L122
Rear, Cone Type, PR-40 Type
Th
is allows you to select the Custom Leslie Cabinet.
NOTE: See the APPENDIX on page 193 for more information about Custom Leslie Cabinets.
ROTOR
SLOW SPEED - HORN / DRUM (L)
Setting Range:
0, 20 ~ 120 [rpm]
Th
ese allow you to set the rotor speed for the “SLOW” or Chorale Mode.
Th
is FUNCTION Mode allows you to select or edit the Parameters for the inbuilt digital Leslie.
Th
e Parameters described on these pages are grouped in macro-settings called
Custom Leslie Cabinets.
Th
ese Parameters cannot be Recorded as individual Patch Parameters; however, a Custom Leslie Cabinet
can be Recorded as part of an ORGAN Patch.
To locate this mode:
[MENU/EXIT] -
CUSTOM
-
LESLIE
- [ENTER]
W H AT A R E “ C U S T O M L E S L I E
CABINETS?”
All of the Parameters described on this page and
on the following page comprise a Custom Leslie
Cabinet. These Parameters cannot be Recorded as
individual Patch Parameters; however, a Custom
Cabinet can be Recorded as part of a Patch.
The SK PRO has 8 diff erent Custom Leslie Cabinets.
These are Factory Cabinets (indicated by an
“F”) which are permanently written in memory.
However, you can create and Record up to 8 User
Cabinets (which will be indicated by a “U”).
To create and Record a Leslie Cabinet, use the
LESLIE FUNCTION Mode to modify the sonic
characteristics of one of the “F” Cabinets. After you
have made all of your changes, you can Record
them as a “U” Leslie Cabinet.
For a list of the Factory Leslie Cabinets consult the
APPENDIX at the back of this Manual starting on
page 193. For a complete list of Leslie Parameters
consult the APPENDIX on page 195.