Chorus, Frequen c y leve l – Hammond SK Pro-73 73-Key Portable Keyboard/Organ User Manual
Page 114
*#1
SK PRO/SK PRO-73 Owner’s Manual
114
Chorus
RATE
Setting Range:
0 ~ 127
Th
is allows you to adjust the rate of the rising and falling eff ect.
A higher value results in a faster rate.
DEPTH
Setting Range:
0 ~ 127
Th
is allows you to adjust the modulation depth.
A higher value results in a deeper modulation.
RESONANCE
Setting Range:
0 ~ 127
Th
is allows you to adjust the resonance (feed-back) amount.
A higher value results in a greater resonance.
MIX
Setting Range:
0 ~ 127
Th
is allows you to adjust the volume balance between the “dry” and the eff ect sounds.
At “0” only the “dry” sound is heard. Th
e eff ect level becomes greater as the value
increases. At “64” the ratio between the “dry” and the eff ect sounds becomes 1:1. At
“127,” only the eff ect sound is heard.
PRE-DELAY
Setting Range:
0 ~ 127
Th
is allows you to delay the signal for a channel even if the source is Monaural. A
higher value creates a time diff erence between Left and Right to the eff ect sound.
DELAY
Setting Range:
0 ~ 127
Th
is allows you to control the delay of the eff ect sound.
A higher value results in a greater delay.
HPF (High Pass Filter)
Setting Range:
0 ~ 127
Th
is allows you to control the frequency range of the eff ect.
At “0” the eff ect is added to all frequencies. Th
e eff ect is added to the higher frequencies
as the value increases.
PHASE
Settings: 2, 3
Th
is allows you to select the algorithm of the Chorus eff ect.
2
......................... two-phase.
3
......................... three-phase.
Frequen
c
y
Leve
l
Mix
Rate
Origina
l
Signa
l
Effe
c
t
Signa
l
Depth
HPF
effe
c
t
range