Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 158)

*#1 SK PRO/SK PRO-73 Owner’s Manual
158
MIDI FUNCTION MODE
Th is FUNCTION Mode allows you to adjust the basic MIDI Parameters as well as Send and Receive a MIDI Memory Dump.
TO LOCATE THIS MODE:
[MENU/EXIT] -
SYSTEM
-
MIDI
- [ENTER]
MIDI TEMPLATE
MIDI TEMPLATE
Th is allows you to Load various pre-programmed MIDI settings.
To Load a MIDI Template, select TEMPLATE, move the cursor
to the [LOAD] icon and press the [ENTER] button.
NOTE: For a detailed listing of MIDI Templates, see “MIDI TEMPLATES”
starting on page 180.
NOTE: If a MIDI Template is selected and any of the following
Parameters are changed, the will display, “User Edited.”
GENERAL
MIDI IN
Th is allows you to select the function of the [MIDI IN] Port.
Sequence
Receives MIDI messages on UPPER, LOWER and PEDAL Parts
on their MIDI Channels. MIDI messages will not be re-sent.
Upper / Lower / Pedal
Use this Template to connect a MIDI keyboard as an (UPPER /
LOWER / PEDAL) keyboard.
Received MIDI messages will sound the Sections allocated
to the (UPPER / LOWER / PEDAL) keyboard ignoring the MIDI
Channel, and will re-send to MIDI OUT and USB-MIDI.
Upper + Pedal / Lower + Pedal
Use this Template to connect two MIDI keyboards as (UPPER
+ PEDAL / LOWER + PEDAL) keyboards.
Received MIDI messages will sound the Sections allocated to
(UPPER, PEDAL / LOWER, PEDAL) keyboards on the assigned
MIDI Channels, and re-send to MIDI OUT and USB MIDI.
Organ Upper / Piano / Ensemble / Synth
A connected MIDI keyboard will play the ORGAN/PIANO/
ENSEMBLE/MONO SYNTH) Sections. MIDI messages will not
be re-sent.
NOTE: The ORGAN Section will play from an UPPER Keyboard only.
NOTE: The SPLIT does not function when the MIDI IN mode is set at
“Upper / Lower ,” “Lower + Pedal” or “Upper + Pedal.”
LOCAL CONTROL
Settings: Off , On
Th is allows you to turn Local Control “ON” or “OFF.”
On ...................... The keyboard plays the internal sounds of the instrument.
Off ..................... The internal sounds of the SK PRO will not play from the
keyboard. Use this setting for recording performance to
an external sequencer with a MIDI Echo feature.
INDIVIDUAL PARAMETERS
Setting Range: Off , NRPN, Sys Ex
Th is sets the way to the transmission the Individual Parameters.
The Individual Parameters are used for controlling Section
Volume, Leslie Fast, etc.
Off ..................... Does not transmit.
NRPN ................ It transmits via NRPN.
Sys Ex ............... It transmits via System Exclusive Message.
NOTE: The SK PRO receives Individual Parameters as System
Exclusive messages regardless of the setting of this
Parameter.
PROGRAM CHANGE
Settings: Off , On
Th is allows you to select whether to transmit and receive Program
Change messages for Combination and External Zones.
DRAWBAR REGISTRATION
Settings: Off , On
This allows you to select whether to transmit and receive
Drawbar Registration.
EXTERNAL ZONES
Settings: Off , On
Th is is a Master On/Off Parameter which allows you to enable
or disable MIDI transmission of all External Zones in one
operation.