Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 49)

49
Turn On And Play
ADJUSTING THE VOLUME
CHANGING THE OCTAVE
Use the [VOLUME] knob in the MONO SYNTH Section to
adjust the volume.
NOTE: You can also adjust the volume of the MONO SYNTH Section
in the PLAY screen by moving the cursor to “VOL” (right side of
screen) and turning the [VALUE] knob.
NOTE: The MANUAL feature is explained in more detail on page 29.
To change the Octave of the entire UPPER Keyboard (all
Sections), press the OCTAVE [UP] or [DOWN] button. Th
e
display will show the current Octave setting.
NOTE: You can select “-2” (up to two octaves down) through +2” (up to
two octaves up).
To change the Octave for the MONO SYNTH Section only, use
the DIRECTION buttons to move the cursor to “PLAY Mode
- MONO SYNTH Section - OCTAVE” and use the [VALUE]
knob to change the Octave. Th
e display will show the current
Octave setting.
NOTE: You can select “-2” (up to two octaves down) through +2” (up to
two octaves up).
To change the Octave of the Oscillator, press the OCTAVE [UP]
or [DOWN] buttons in the MONO SYNTH Section. The
display will show the current Octave setting.
NOTE: You can select “-2” (up to two octaves down) through +2” (up to
two octaves up).