Hammond SK Pro-73 73-Key Portable Keyboard/Organ - Manual (Page 56)

*#1 SK PRO/SK PRO-73 Owner’s Manual
56
ADJUSTING THE SOUND DURING PERFORMANCE
Th ere are a number of adjustments you can make to the sound during performance.
Th is is explained in more detail starting below.
REVERB
REVERB (or Reverberation) is the prolongation or persistence
of sound caused by sound bouncing or refl ecting off of hard
surfaces such as fl oors, walls or ceilings. It is measurable by the
interval of time required for the sound to decay to inaudibility
after the source of the sound has been stopped.
Th
e SK PRO has built-in Digital Reverb which allows you to
simulate several diff erent acoustic profi les representing diff erent
sizes and types of enclosures.
[REVERB ON] button (Com)
Th is allows you to turn Reverb “ON”(LED lit) and “OFF.”
[REVERB DEPTH] knob (Com)
Th is allows you to adjust the overall depth of the entire Reverb
eff ect.
NOTE: You can adjust the Reverb Level for the ORGAN, PIANO,
ENSEMBLE and MONO SYNTH Sections separately. This is
explained in more detail on page 77.
NOTE: You can adjust the Reverb Type for the ORGAN and PIANO/
ENSEMBLE/MONO SYNTH Sections separately. This is
explained in more detail on page 77.
NOTE: These Parameters are marked “Com,” meaning they are
Combination Parameters.
MASTER EQUALIZER
Th e MASTER EQUALIZER allows you to adjust the overall
tonal quality for all Sections of the entire instrument.
[MASTER EQ ON] button (Sys)
To enable the MASTER EQUALIZER, press the [MASTER
EQ] button “ON.” Th
e LED will light.
You can adjust the MASTER EQUALIZER Parameters by
Pressing and Holding the [MASTER EQ] button and moving
the AMPLITUDE ENVELOPE Slider Controls in the
MONO SYNTH Section (see the illustration at the top of this
page).
[ATTACK] (BASS GAIN) slider (Sys)
[DECAY] (MID FREQUENCY) slider (Sys)
[SUSTAIN] (MID GAIN) slider (Sys)
[RELEASE] (TREBLE GAIN) slider (Sys)
Th e pop-up screen shown above will display while adjusting
the MASTER EQUALIZER Parameters.
NOTE: You can “shortcut” to the MASTER EQUALIZER FUNCTION
Mode Page to adjust the Parameters in depth by Pressing and
Holding the [MASTER EQ] button (P. 117).
In addition, each Section has an EQUALIZER Page in its
FUNCTION Mode if you wish to adjust the tone quality of an
individual Section (see page 116 for more details).
NOTE: These Parameters are marked “Sys,” meaning they are System
Parameters common to all Combinations and Patches.
You must Record these Parameters if you want their settings
to be remembered the next time the instrument is turned
“ON.” See page143 for instructions on how to do this.