Reverb – Hammond SK Pro-73 73-Key Portable Keyboard/Organ User Manual

Page 77

Advertising
background image

77

Editing Parameters

REVERB

SHORTCUT: Press and Hold the [REVERB] button.

Th

is Page allows you to select the REVERB eff ect for each Section.

SWITCH

Settings: Off , On

Th

is allows you to turn REVERB “ON” or “OFF.”

NOTE: This Parameter is linked to the REVERB [ON] button on the Control Panel.

DEPTH

Setting Range:

0 ~ 127

Th

is allows you to set the overall depth of the entire Reverb eff ect.

NOTE: This Parameter is linked to the [REVERB DEPTH] knob on the Control Panel.

LEVEL (ORGAN, PIANO, ENSEMBLE, SYNTH)

Setting Range:

0 ~ 127

Th

ese allows you to select the depth of the Reverb (= send level) for each Section.

TYPE

(ORGAN)

TYPE

(PIANO/ENSEMBLE/SYNTH)

Th

is allows you to select Reverb Types.

Room 1

............ Large room.

Room 2

............ Small room.

Live

................... Ambient room.

Hall 1

................ Dark Hall, similar to a theatre.

Hall 2

................ Bright Hall, similar to an auditorium.

Church

............. Church.

Plate

................. Iron-plate Reverb.

Spring

.............. Spring Reverb.

NOTE: You can select diff erent Reverb Types for the ORGAN and PIANO/ENSEMBLE/MONO

SYNTH Sections.

TIME

(ORGAN)

TIME

(PIANO/ENSEMBLE/SYNTH)

Setting Range:

0 ~ 127

Th

is allows you to adjust the decay of the Reverb.

A higher value results in a longer decay.

NOTE: You can select diff erent Reverb Times for the ORGAN and PIANO/ENSEMBLE/MONO

SYNTH Sections.

PRE-LPF

(ORGAN)

PRE-LPF

(PIANO/ENSEMBLE/SYNTH)

Setting Range:

0 ~ 127

Th

is allows you to adjust the tone quality of the Reverb.

Higher values simulate a harder fl oor/wall/ceiling material.

NOTE: You can select diff erent settings for the ORGAN and PIANO/ENSEMBLE/MONO SYNTH

Sections.

NOTE: The Parameters described on this

page are Combination Parameters
and can be Recorded to individual
Combinations. For a complete listing
of all Combination Parameters, please
consult “COMBINATION PARAMETERS”
starting on page 184.

Advertising