Motorola 68P02958C00-B - Manual (Page 134)

MDLC Links Configurator
5-77
When you save a configuration file for the first time, the ToolBox displays the Save dialog
box.
Type the name of the link configuration file you want to create, and click OK. The ToolBox
automatically adds the .txt extension. If you specify the name of a link configuration file that
appears on the list, the ToolBox issues a message asking you whether you want to overwrite
the existing file. Select Yes only if you want to replace the existing file with the new one.
Save As
Saves the current link configuration information under a different file name. Use this
command when you want to create a new link configuration file that is slightly different from
an existing one. To do so, open an existing file, and click Save As in the File menu. The
command opens the Save As dialog box as shown below.
To save the file under a different name, highlight the existing file name, type the new name
and click OK. The ToolBox automatically adds the .txt extension. The Links Configurator
program stores the current file under the new name on disk.
If you specify the name of a link configuration file that appears on the list, the ToolBox issues
a message asking you whether you want to overwrite the existing file. Select Yes only if you
want to replace the existing file with the new one.
Save All
Saves all open link configuration files. If a file has not been saved before, the ToolBox
displays the Save Configuration dialog box. Enter the new link configuration file name in the
File Name box and click OK.
Print
The Print command (MDLC Links Configurator, File menu) prints the contents of the link
configuration file to a printer.