Motorola 68P02958C00-B - Manual (Page 177)

Dial Up
5-120
Save As
The Save As command saves the current dial-up information under a different file name.
Generally, you’ll use this command when you want to create a dial-up file that is slightly
different from an existing one (load the existing file, save it under a new name, and make the
changes).
The command opens the dialog box shown below. This dialog also appears when you request
to save a file for the first time.
Dialog box parameters
Use the parameters in the order specified below. Normally you’ll only use the File Name
parameter.
Look in
If the currently displayed directory is not the correct one, double-click the arrow to the right of
the Look in parameter and locate the drive/directory. To access sub-directories, double-click
parent directories.
File Name
Type the name of the dial up file you want to create, and click OK. ToolBox automatically
adds the .dlp extension. If you specify the name of an existing dial up file, ToolBox asks you if
you want to overwrite the existing file. Select Yes only if you want to replace the existing file
with the new one.
Files of Type
This box shows the type (extension) of the files currently displayed in the File Name list. If the
displayed file type “filter” is not .dlp, open the drop-down list and select the .dlp type.
Print
This command prints the current dial up file to your standard system printer. If no printer is
set up, see Windows Help or your system administrator.