Motorola 68P02958C00-B - Manual (Page 143)

Site Table
5-86
Dialog box parameters and functions
Number of Sites
Double-click and enter the number of sites you want to add to the Site table.
First Site ID
Double-click and enter the first Site ID in the current group.
Retries
Double-click to enter the number of attempts to be made to communicate with a non-
responding site. The default value is 1. The valid range of retries is 1-255.
Time-out
Double-click to define the time (in seconds) to wait between communication retries. The
minimum value is 1 second, the maximum value is 255 seconds. The default value is 30
seconds.
Primary Link ID
Click on the down arrow and select the proper Link ID from the list box. The default Link ID
is Radio 1.
Primary Link Validity
Double-click to define the time to wait for a response from a RTU. The format is
HHH:MM:SS. If there is no response within the specified time, the link is marked as
unreachable.
Secondary link ID
Click on the down arrow and select the proper Link ID (other than the Primary) from the list
box. The default Link ID is Radio 1.