Motorola 68P02958C00-B - Manual (Page 260)

IP Gateway Web Operation
6-25
counters. Level 11 gets the data without resetting the counters. For details on the devices
and levels, see the Software Diagnostics Output section below.
5. To retrieve the diagnostics from the site, click on the GO button. The diagnostic messages
will be displayed in the message area of the window.
6. To send the software diagnostics from the screen via email, click on the Send Diagnostics
by Email icon in the bottom left-hand corner of the screen. A new mail message will be
opened in the PC's mail program and all diagnostics retrieved from the site in the last
session will be copied to the body of the message. Type in the destination address and
send the message.
For more information on the IP Gateway ToolBox Software Diagnostics, see the SW
Diagnostics & Loggers section above. For a detailed list of software diagnostic messages, see
the Software Diagnostics Output section below.
Setting SNMP Configuration using the Web Server
The Web server enables the user to define SNMP and Motorola SSC parameters for the IP
Gateway remotely, over the web.
To set the SNMP Configuration for the IP Gateway, do the following:
1. Follow the instructions under the Accessing the Web Server section above.
2. Click on the SNMP Configuration link from the list of MOSCAD Tools. The following
screen will be displayed.
3. Enter values for each field, as described in the SNMP Configurator section above.
4. To download the SNMP configuration to the site, click on the Set Configuration button.
5. To refresh the data received from the sites in the internal IP Gateway cache, click on the
Reload button.